Service area · Arlington County
Dryer Vent Installation in Arlington, VA
New dryer vent runs installed the right way — smooth rigid metal duct, the shortest practical route, and a proper wall or roof exit with a working damper.
Arlington is a community in Arlington County where many dryer vents exit through the roof, so lint collects out of sight for years at a time. With 22201 and the surrounding streets on our regular routes, we know these vent layouts well. One visit a year is all most Arlington homes need from us.
A lot of Arlington dryers vent through the roof — a run that climbs a full storey before it ever sees daylight — so the vent flap outside is the honest gauge: if it barely opens, the run is struggling. Book it once and the difference shows up in the very first load of laundry. From our base in Beltsville we bring Arlington and the rest of Arlington County the same standard we bring everywhere in Virginia: the full line serviced, the cap checked, the airflow proven.
A dryer can only dry as well as its vent lets it. When a home is built, remodeled or the laundry room moves, the vent run is often an afterthought — foil flex stuffed through the nearest wall, a run that is far too long, or no proper exit at all. A correct installation is the opposite: planned first, built from smooth rigid metal, and finished with an exit that actually seals and swings.
We install complete vent systems for new construction, remodels, laundry relocations and homes whose original vent was never right. Every run is planned around the dryer manufacturer's requirements and local building and mechanical codes: shortest practical path, gentle elbows, supported and sealed joints, and a termination with a free-moving damper — never a screen that traps lint.
What's included
- Complete new vent runs for homes, apartments and commercial laundry rooms
- Smooth rigid metal duct — semi-rigid metal only where a transition calls for it
- Wall and roof exits with correct caps, dampers and flashing coordination
- Recessed vent boxes and periscope fittings for tight laundry closets
- Airflow measured at the new exit before we call the job done
ZIPs we cover in Arlington
22201, 22203, 22204, 22202, 22205, 22207 — and every surrounding ZIP on our routes. Not listed? Call (855) 640-0404 and we will check your address.
Questions from Arlington customers
Building and mechanical codes commonly cap a run at about 35 feet, subtracting length for every elbow. If your layout needs more distance, we plan a booster fan or a better route — and tell you which before anything is cut.
Yes — garage conversions, basement laundry rooms and relocated laundry spaces are routine installs for us. We plan the route, set the exit and build the full run.
The same full protocol everywhere: the dryer pulled out and disconnected, the entire line brushed and vacuumed to the outside cap, the cap and damper cleaned and checked, and a live airflow test with the dryer running before we leave.
Two ways: the lint we remove is yours to see, and the final airflow test at the outside cap shows the flap swinging the way it should. Most customers notice it in the first load — one cycle, dry clothes.
More services in Arlington
Dryer Vent Installation nearby
Book Your Vent Cleaning
Tell us what you need and we'll call you back to confirm. Rather talk now? (855) 640-0404 — answered 24/7.
How it works
Our Process
Plan the route
We map the run from dryer to daylight — length, elbows, exit point — against the appliance maker's limits and local code.
Set the exit
The wall or roof termination is cut, fitted with the right cap and damper, and sealed against weather and pests.
Build the run
Rigid metal sections go in with supports and sealed, clamped joints — no screws poking into the airstream to catch lint.
Connect & test
The dryer is connected with a proper transition duct, and exhaust airflow is measured at the exit.